JET SKI SERVICES and REPAIR

Watercraft Performance

Moto Technologies' specialty is watercraft performance serving all brands. Free estimates available. Inspection and servicing of all components is vital to the operation of your watercraft!

Tune-ups

PWC Tune-ups are recommended every 30 hours of riding time. Watercraft tune-up includes:

  • Replacing spark plugs
  • Engine Compression Test
  • Grease PTO (Power TakeOff)
  • Carburetor Adjustment
Watercraft Repair California

Carburetor Rebuilds

Jet Ski Carburetor rebuilds for personal watercraft vary depending on application. Kit charges and replacement parts will apply.

Watercraft Engine Rebuilds

Major engine rebuilds are available for all Personal Watercraft. There is no guess work performed here, everything is tested in our in-house testing facilities.

PWC Winterization Service

Moto Technologies recommend to winterize all watercraft. Winterization is the process of removing water from cylinder block and exhaust system to prevent freezing in the winter time or higher elevations like Lake Tahoe. This process also includes fogging cylinders with oil to prevent corrosion and rust, along with disabling the electrical system to prevent starting until ready to Dewinterize.

Other Repairs and Jet Ski Service

Repairs and diagnosis are available for all PWC makes and models in Moto Technologies watercraft repair shop located in Sacramento, Ca.. Down time varies depending on availability of parts.

 

Moto Technologies, Inc.

Phone (916) 334-7665

 

4740 Myrtle Ave. Suites 2 & 3
Sacramento, CA 95841

info@sacmototech.com



Carburetor Adjustments

Did you know that elevation effects the performance of your personal watercraft? If you want the highest levels of efficiency and speed from your jet ski, a carb tuning is highly recommended by our Sacramento Jet Ski Repair Shop!

PWC Jet Pump Service

PWC’s are required to have jet pump serviced on a regular basis. SeaDoo Jet Pumps have a sealed, oil-filled impeller shaft which requires oil change every 30 to 50 hours. Failure to have this service performed regularly results in costly watercraft repairs.

Hydrolock Removal

Hydrostatic lock, hydraulic lock or hydro lock occurs when liquids, typically water, enter an engine cylinder. You can hydro lock a jet ski engine by flipping or sinking a machine in the waters and then cranking the engine several times trying to start the engine. This process will bring water up the exhaust system filling the crankcase with water. Because water does not compress, the engine becomes locked up.

The best way to remove a hydro lock is to take your PWC to our qualified watercraft repair service center in Sacramento to have it properly removed. If not handled properly, water ingestion will cause internal corrosion which results in premature personal watercraft engine failure.

Minor Fiberglass PWC Repairs

Moto Technologies has been repairing and reconstructing personal watercraft fiberglass in Sacramento area for years. We repair all makes and models. With us around, its no longer necessary to pay dealer prices for dealer quality work.

Email us a photo of your damaged PWC for a quote.